BMR 2005-2014 Mustang Radiator Support By BMR
If you are drag racing your new 2005-2014 Mustang and don't need a front sway bar, this BMR crossmember can save an additional 11 lbs. off the front end. The factory radiator crossmember is built overly strong because it must also support the additional loads of the front sway bar. With the swaybar removed, the crossmember only needs to support the weight of the radiator. Our lightweight crossmember only weighs 5.5 lbs. as compared the OE 16.5 lbs. Combined with sway bar removal, expect a 26.5 Lb. weight reduction!
Easy 30-45 minute install. Allows the use of the factory bumper cover support plastic.
Benefits:
- Save 11 lbs. off the front end
- Overly Strong
- Only weighs 5.5 lbs. compared to OEM's 16.5 lbs.
Includes:
- Radiator Support Crossmember
- All hardware for easy installation
- 2005 Mustang GT | 2005 Mustang GT500
- 2006 Mustang GT | 2005 Mustang GT500
- 2007 Mustang GT | 2005 Mustang GT500
- 2008 Mustang GT | 2005 Mustang GT500
- 2009 Mustang GT | 2005 Mustang GT500
- 2010 Mustang GT | 2005 Mustang GT500
- 2011 Mustang GT | 2005 Mustang GT500
- 2012 Mustang GT | 2005 Mustang GT500
- 2013 Mustang GT | 2005 Mustang GT500
- 2014 Mustang GT | 2005 Mustang GT500
